T-Shirt Quilt Planner

Enter your shirts and the size of the design on each one. The planner lays them out in a grid or in mixed-size columns, sizes every block, and tells you how to cut each shirt and how much interfacing, sashing, border, backing and binding fabric to buy.

Your shirts (12)

Design size in inches

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  6. 6
  7. 7
  8. 8
  9. 9
  10. 10
  11. 11
  12. 12
Start a list of identical shirts

Layout

Quilt size

Block size

Finished width; 0 for none. 2 to 3 in is usual.

Finished width; 0 for none.

Cornerstones

More options

Clear shirt fabric between each design and the seam.

Empty: the planner picks.

12 shirts in 3 x 4 blocks of 15 in make a 53 x 70 in quilt.

Closest standard size: Throw (50 x 65 in).

15K fun run2High school t...3Band camp4Family reunion5State fair6Soccer league7Science club8Summer camp9College dorm10Choir tour11Charity walk12Fishing trip
Dashed box: the designSashing

Fabric to buy

FabricCutBuy
Sashing15 strips 2 1/2 in x width of fabric, cut into 16 at 2 1/2 x 15 1/2 in; 5 at 2 1/2 x 53 1/2 in (each joined from width-of-fabric strips; 7 strips in all)1 1/8 yd
Fusible interfacing (20 in wide)12 at 16 1/2 x 16 1/2 in5 1/2 yd
Backing2 lengths of 61 in, 1 horizontal seam3 1/2 yd
Binding7 strips 2 1/2 in x width of fabric, joined (256 in)1/2 yd
Batting4 in larger than the top on every side61 x 78 in

Cutting each shirt

Rough-cut around the design, fuse the interfacing, then trim to size.

#ShirtCut
15K fun runDesign 10 x 11 inRough 17 1/2 x 17 1/2 inInterfacing 16 1/2 x 16 1/2 inTrim 15 1/2 x 15 1/2 in
2High school trackDesign 11 x 12 inRough 17 1/2 x 17 1/2 inInterfacing 16 1/2 x 16 1/2 inTrim 15 1/2 x 15 1/2 in
3Band campDesign 9 x 10 inRough 17 1/2 x 17 1/2 inInterfacing 16 1/2 x 16 1/2 inTrim 15 1/2 x 15 1/2 in
4Family reunionDesign 12 x 9 inRough 17 1/2 x 17 1/2 inInterfacing 16 1/2 x 16 1/2 inTrim 15 1/2 x 15 1/2 in
5State fairDesign 10 x 10 inRough 17 1/2 x 17 1/2 inInterfacing 16 1/2 x 16 1/2 inTrim 15 1/2 x 15 1/2 in
6Soccer leagueDesign 8 x 10 inRough 17 1/2 x 17 1/2 inInterfacing 16 1/2 x 16 1/2 inTrim 15 1/2 x 15 1/2 in
7Science clubDesign 11 x 11 inRough 17 1/2 x 17 1/2 inInterfacing 16 1/2 x 16 1/2 inTrim 15 1/2 x 15 1/2 in
8Summer campDesign 10 x 12 inRough 17 1/2 x 17 1/2 inInterfacing 16 1/2 x 16 1/2 inTrim 15 1/2 x 15 1/2 in
9College dormDesign 12 x 12 inRough 17 1/2 x 17 1/2 inInterfacing 16 1/2 x 16 1/2 inTrim 15 1/2 x 15 1/2 in
10Choir tourDesign 9 x 12 inRough 17 1/2 x 17 1/2 inInterfacing 16 1/2 x 16 1/2 inTrim 15 1/2 x 15 1/2 in
11Charity walkDesign 10 x 8 inRough 17 1/2 x 17 1/2 inInterfacing 16 1/2 x 16 1/2 inTrim 15 1/2 x 15 1/2 in
12Fishing tripDesign 7 x 6 inRough 17 1/2 x 17 1/2 inInterfacing 16 1/2 x 16 1/2 inTrim 15 1/2 x 15 1/2 in

How many T-shirts do you need for a quilt?

Shirts per standard quilt size, in a grid with 2 in sashing between the blocks and around the outside. Blocks of 12 in suit children's and youth shirts; 15 in suits most adult fronts. Add a border to grow the quilt without more shirts.

Quilt12 in blocks15 in blocks
Baby36 x 52 in8 shirts2 x 4 grid, 30 x 58 in6 shirts2 x 3 grid, 36 x 53 in
Throw50 x 65 in15 shirts3 x 5 grid, 44 x 72 in12 shirts3 x 4 grid, 53 x 70 in
Twin70 x 90 in30 shirts5 x 6 grid, 72 x 86 in20 shirts4 x 5 grid, 70 x 87 in
Queen90 x 108 in48 shirts6 x 8 grid, 86 x 114 in30 shirts5 x 6 grid, 87 x 104 in
King108 x 108 in64 shirts8 x 8 grid, 114 x 114 in36 shirts6 x 6 grid, 104 x 104 in

Worked example: twelve shirts

Twelve adult shirt fronts, the largest design 12 x 12 in, with 1 1/2 in of space kept around each design and 2 in sashing.

  1. The largest design plus 1 1/2 in on every side needs 15 in, so every block finishes at 15 x 15 in.
  2. Twelve blocks in 3 columns and 4 rows, with sashing between them and around the outside: 3 x 15 + 4 x 2 = 53 in wide and 4 x 15 + 5 x 2 = 70 in long.
  3. Rough-cut each shirt 17 1/2 x 17 1/2 in, fuse a 16 1/2 x 16 1/2 in piece of interfacing to the back, then trim to 15 1/2 x 15 1/2 in.
  4. One interfacing piece fits across 20 in interfacing, so twelve need 198 in: 5 1/2 yd.
  5. Sashing: 15 strips 2 1/2 in wide, 1 1/8 yd. Backing 3 1/2 yd, binding 1/2 yd.

Result: A 53 x 70 in quilt, close to a throw.

Grid or mixed sizes?

Grid: every block the same size

The classic T-shirt quilt. Every shirt is trimmed to one square, usually 12 in for children's and youth shirts and 14 to 16 in for adult fronts. It is the easiest to sew, and sashing between the blocks hides small differences in the shirts. A design larger than the block is cut into or needs a bigger block for everyone.

Mixed sizes: columns of different heights

Each shirt gets a block one column wide and only as tall as its design, so a small chest logo is not lost in a big square and a large back print keeps its full size. The planner deals the blocks into columns, then evens the columns out by cutting shorter blocks up to 3 in taller and, past that, adding a plain strip at the foot of the column. Columns sew together with straight seams, so it is only a little harder than a grid.

How to make a T-shirt quilt

From a stack of shirts to a finished quilt, in the order the planner's cutting list assumes.

  1. Wash and dry every shirt without fabric softener, which can stop fusible interfacing from sticking.
  2. Cut each shirt apart: up both side seams, then across below the collar and sleeves, so the front lies flat as a single layer. Keep the back too if it has a design.
  3. Rough-cut each panel to the planner's rough-cut size, centered on the design. The extra half inch on every side keeps the interfacing's glue off your iron and gives room to square up.
  4. Fuse lightweight woven fusible interfacing to the back of each panel. Press straight down and lift; do not slide the iron, which stretches the knit. Let each panel cool flat.
  5. Trim each fused panel to its trim size with a square ruler, centering the design and keeping it the planned distance from the edges.
  6. Lay the blocks out on a floor or design wall, mixing colors and busy and quiet designs, then pin a number to each one to match the plan.
  7. Sew the blocks into rows (grid) or columns (mixed sizes) with 1/4 in seams, adding sashing strips between them. Press seams toward the sashing.
  8. Join the rows or columns with the long sashing strips, then add the side borders and then the top and bottom borders.
  9. Layer the top with batting and backing, quilt it, then bind the edges.

Assumptions

  • Sizes are in inches. Block and quilt sizes are finished sizes; every cut adds 1/4 in seam allowance on each side.
  • A design is the printed area you want to keep. By default the planner leaves 1 1/2 in between the design and each finished edge; change it under More options.
  • Interfacing is lightweight woven fusible (such as Pellon SF101), 20 in wide, cut 1 in larger than the trim size. Shirts are rough-cut 1 in larger than that.
  • Sashing, border, filler, backing and binding fabric is quilting cotton with 42 in of usable width. Strips longer than 42 in are joined, allowing 1/2 in for each join.
  • Sashing also frames the outside of the blocks. Borders go on outside the sashing: sides first, then top and bottom.
  • Backing and batting are 4 in larger than the top on every side; binding is 2 1/2 in double-fold strips. These match the backing, batting and binding calculators.
  • Yardage rounds up to the next 1/8 yd. Buy a little extra if you pre-wash or are cutting from shirts with seams in awkward places.

Frequently asked questions

How many T-shirts do I need for a quilt?

With 15 in blocks and 2 in sashing: about 12 for a throw, 20 for a twin and 30 for a queen. Smaller 12 in blocks need more shirts for the same size. Shirts with a design on the back count twice if you use both sides.

What size should T-shirt quilt blocks be?

Measure your largest design and add the space you want around it (1 1/2 in each side is a good minimum). Most adult shirt fronts fit a 14 to 16 in block; children's shirts fit 12 in. Leave the block size on Auto and the planner picks the smallest standard size that fits every design.

Do I need interfacing for a T-shirt quilt?

Yes. T-shirt knit stretches as you cut and sew it, so blocks come out wavy and uneven. A lightweight woven fusible on the back makes each block behave like quilting cotton while keeping it soft.

Can I mix shirts with small and large designs?

Yes. Choose the mixed-size layout: each block is as tall as its design needs, and the planner evens the columns out. In a grid, a small logo sits in a large square of plain shirt fabric, which also works if you like the calm look.

Do I have to use sashing?

No. Set sashing to 0 and the blocks sew straight to each other. Sashing makes the quilt larger without more shirts, frames each design, and hides slightly uneven blocks, which is why most T-shirt quilts have it.

What if I do not have enough shirts for the size I want?

Pick the size and the planner adds plain filler blocks, spread through the quilt. Use a sleeve print, a pocket, a shirt back or a coordinating fabric for them, or add a wider border instead.

Is the planner free?

Yes. It runs in your browser, needs no account and remembers your list on this device only.

Free patterns to try

Printable PDF patterns with cutting charts and diagrams, free to download.

Browse all 380+ free patterns

Try sashing and border colors before you buy

Lay out a quilt in QuiltLab's grid editor and try fabric colors for the sashing, cornerstones and border around your shirts.

Free forever, no card needed.

Get quilting tips by email

QuiltLab updates, tips and quilting inspiration. Unsubscribe anytime.