Fabric Scissors for Quilters

A rotary cutter does most quilt cutting, so the scissors you need are a pair of 8 inch shears for yardage and trimming, small snips for threads, and fine applique scissors if you do applique. Gingher shears are the classic; Kai shears are lighter and very sharp; Fiskars are the budget pick. Below, six scissors compared by what each job needs.

At a glance

Fabric scissors compared
NameKindBest forKeep in mind
Gingher 8" dressmaker shears8" bent-handle shearsYardage, backing, trimmingHeavy; have them sharpened, not replaced
Kai 8" shears8" lightweight shearsLong cutting sessionsLess heft for thick layers
Fiskars 8" Original orange-handled scissors8" all-purposeA first pair, or batting scissorsDuller edge than premium shears
Karen Kay Buckley Perfect ScissorsSmall serrated scissorsApplique, trimming, slippery fabricNot for long straight cuts
Thread snipsSpring-loaded snipsClipping threads while sewingToo small for fabric
Small embroidery scissorsSmall pointed scissorsHand applique, hand quilting, close trimsToo small for fabric cuts

Descriptions from each maker's product information, checked 2026-11-10. Prices vary by size and shop, so none are listed.

How to choose

Shears for yardage. An 8 inch pair with a bent handle cuts yardage, backing and borders with the fabric flat on the table. Heavier shears cut thick layers more easily; lighter ones are kinder to sore hands.

Snips for threads. Spring-loaded snips beside the machine save more time than any other cutting tool when you chain piece.

Serrated or smooth. Serrated blades grip slippery fabric and small applique shapes. Smooth blades cut longer, cleaner straight lines and are easier to sharpen.

Keep them sharp. Use fabric scissors only on fabric. Cut batting and paper templates with a separate pair, and have good shears professionally sharpened when they start to chew.

Gingher 8" dressmaker shears

GingherBent handleThe classic

In short: The shears many quilters keep for life: heavy, sharp and easy to have resharpened.

Gingher's 8 inch dressmaker shears are steel with a bent handle, so the lower blade rides flat on the table while you cut and the fabric stays put. They are heavy, which helps them cut cleanly through several layers and backing fabric, but tires some hands. Gingher shears can be professionally sharpened many times, which is why quilters keep one pair for decades.

Length
8 inches
Best for
Cutting yardage, backing and trimming batting

What quilters like

  • Very sharp, long-lasting edge
  • Can be resharpened
  • Bent handle keeps fabric flat

Watch out for

  • Heavy
  • Costs more than plastic-handled shears

Tips

  • Keep fabric shears for fabric only. Paper and batting dull blades fastest; use an old pair for batting if you can.

Kai 8" shears

KaiLightVery sharp

In short: Japanese steel in a lighter body: very sharp, and easier on the hand than Gingher.

Kai makes lightweight shears with stainless steel blades and plastic handles. Many quilters choose them over Gingher because they cut just as cleanly but weigh less, which matters if your hands tire or ache. The lighter build has less heft for cutting through many layers at once.

Length
8 inches
Best for
Quilters with sore hands; everyday cutting

What quilters like

  • Light
  • Very sharp
  • Comfortable handles

Watch out for

  • Less heft for thick layers
  • Plastic handles feel less solid than all-steel shears

Fiskars 8" Original orange-handled scissors

FiskarsBudgetEasy to find

In short: The budget pair everyone recognizes; a good first pair or a dedicated batting pair.

Fiskars' orange-handled scissors are sold almost everywhere and cost a fraction of premium shears. They cut quilting cotton well when new, and are a sensible choice for batting and paper so your good shears stay sharp. Expect to replace them rather than sharpen them.

Best for
First pair, batting, paper templates

What quilters like

  • Cheap
  • Easy to find
  • Comfortable plastic handles

Watch out for

  • Edge dulls sooner
  • Usually replaced, not sharpened

Karen Kay Buckley Perfect Scissors

Serrated bladeAppliqueSeveral sizes

In short: A serrated blade grips the fabric, so small applique shapes cut cleanly without sliding.

Karen Kay Buckley's Perfect Scissors have micro-serrated blades that hold fabric in place as you cut, which helps with applique shapes, curves and slippery fabrics. They come in several sizes, from small to medium. They are made for control, not speed, so use shears or a rotary cutter for long cuts.

Blade
Micro-serrated
Best for
Applique, curves, trimming close

What quilters like

  • Fabric does not slide
  • Precise on curves
  • Several sizes

Watch out for

  • Slow for long cuts
  • Serrated blades need special sharpening

Thread snips

Spring-loadedBy the machineCheap

In short: Keep a pair beside the machine: they open on their own, so you snip with one hand.

Thread snips are small spring-loaded blades that open when you let go, so you can snip threads between chain-pieced units with one hand. Gingher, Fiskars and many others make them. They are the cutting tool you will use most at the machine.

Best for
Chain piecing, clipping threads

What quilters like

  • One-handed
  • Fast
  • Inexpensive

Watch out for

  • Only for threads and tiny trims

Small embroidery scissors

4" or smallerSharp pointsHand work

In short: Sharp points for clipping close to stitches, seams and applique edges.

Small embroidery scissors (about 4 inches or less) have fine, sharp points for clipping into seam allowances, trimming threads close to a knot and cutting away fabric behind applique. A pair in a hand-sewing kit covers hand applique, English paper piecing and hand quilting. Many come in decorative stork shapes; the points matter more than the handles.

Best for
Hand sewing, clipping seams, trimming close

What quilters like

  • Precise points
  • Fit in a travel kit

Watch out for

  • Too small for cutting fabric

Related guides

Frequently Asked Questions

What scissors do quilters need?

Most quilters use three: 8 inch shears for yardage and trimming, spring-loaded snips for threads at the machine, and small sharp scissors for hand work or applique. A rotary cutter does the rest.

Are Gingher scissors worth it?

If you will keep them for fabric only and have them sharpened, yes: Gingher shears last decades. If your hands tire, a lighter pair such as Kai may suit you better.

Can I cut batting with fabric scissors?

You can, but batting dulls blades faster than cotton. Many quilters keep an older or budget pair for batting and paper.

Do I need scissors if I have a rotary cutter?

Yes. A rotary cutter handles straight cuts, but you still need snips for threads and scissors for curves, clipping and trimming batting.

Free patterns to try

Printable PDF patterns with cutting charts and diagrams, free to download.

Browse all 380+ free patterns

Plan your next quilt

Lay out blocks and try colors in QuiltLab's grid editor before you cut.

Free forever, no card needed.

Get quilting tips by email

QuiltLab updates, tips and quilting inspiration. Unsubscribe anytime.