AccuQuilt GO! Die Guide

Every GO! Qube shape and GO! strip cutter, with AccuQuilt’s item number and the size it cuts, and the free QuiltLab patterns each set can cut from start to finish. 124 Qube dies and 18 strip cutters, checked against AccuQuilt’s product pages on November 9, 2026.

QuiltLab is independent and not endorsed by AccuQuilt. AccuQuilt, GO! and GO! Qube are AccuQuilt’s trademarks.

How Qube sizes work

Each GO! Qube Mix & Match set is named for the finished block it makes. Shape 1 is a square that finishes at half the block, shape 2 a square at a quarter of it. Shapes 3 and 5 are half-square triangles at those two sizes, shape 4 a quarter-square triangle at half the block, and shape 8 a rectangle a quarter by a half. So the 8" set’s shape 1 finishes at 4" and its shape 2 at 2". A flying goose is a shape 4 body with two shape 5 wings.

GO! Qube sizes

SetShape 1 squareShape 2 squareCuttersFree patterns it cuts
GO! Qube 4"2 1/2" cut, 2" finished1 1/2" cut, 1" finishedGO! Me, GO!, GO! Bolt, GO! Big11
GO! Qube 5"3" cut, 2 1/2" finished1 3/4" cut, 1 1/4" finishedGO! Me, GO!, GO! Bolt, GO! Big0
GO! Qube 6"Shares dies with 12"3 1/2" cut, 3" finished2" cut, 1 1/2" finishedGO! Me, GO!, GO! Bolt, GO! Big5
GO! Qube 8"Shares dies with 16"4 1/2" cut, 4" finished2 1/2" cut, 2" finishedGO! Me, GO!, GO! Bolt, GO! Big34
GO! Qube 9"5" cut, 4 1/2" finished2 3/4" cut, 2 1/4" finishedGO! Me, GO!, GO! Bolt, GO! Big0
GO! Qube 10"5 1/2" cut, 5" finished3" cut, 2 1/2" finishedGO!, GO! Bolt, GO! Big0
GO! Qube 12"Shares dies with 6"6 1/2" cut, 6" finished3 1/2" cut, 3" finishedGO!, GO! Bolt, GO! Big16
GO! Qube 16"Shares dies with 8"8 1/2" cut, 8" finished4 1/2" cut, 4" finishedGO!, GO! Bolt, GO! Big6

GO! strip cutters

24" dies for strips: binding, sashing, borders and strip sets. AccuQuilt lists them for the GO!, GO! Bolt, GO! Big and Studio cutters, and the two 6" x 24" dies for the GO! Me too.

Some of these links are affiliate links: QuiltLab may earn a commission if you buy through them, at no extra cost to you.

Find patterns for your dies

Open a Qube size above to see its shapes, the free quilts written for it, and the free patterns it cuts. Every block pattern in the free pattern library also shows which dies cut its pieces, under “Cut it with AccuQuilt GO! dies”.

Frequently Asked Questions

Which GO! Qube size should I start with?

Start with the block size you make most. In QuiltLab's free pattern library the GO! Qube Mix & Match 8" Block set cuts every piece of 34 patterns, more than any other Qube size. Its dies make 8" blocks, and four of them make a 16" block.

Do the Companion Sets work on their own?

No. AccuQuilt says you need the same-size GO! Qube Mix & Match set before adding a Companion Set: the Corners set (shapes 9 to 12.1) and the Angles set (shapes 13 to 16) continue its shape numbers.

Which cutter do the dies fit?

AccuQuilt lists the 4", 5", 6", 8" and 9" Qube sets for the GO! Me, GO!, GO! Bolt and GO! Big cutters. The 10", 12" and 16" Mix & Match sets include 10" x 10" dies and are listed for the GO!, GO! Bolt and GO! Big, not the GO! Me. Check the cutter list on AccuQuilt's page for the die you want.

Are QuiltLab patterns written for AccuQuilt?

Some are. 7 free quilt patterns are written for the GO! Qube Mix & Match 8" Block set: every patchwork piece is die cut, and each pattern gives rotary sizes too. Our other patterns give rotary cutting steps. Where a GO! die cuts a piece to the exact size the pattern needs, the pattern's page names the die and its shape number. We never suggest a die that is even 1/16" off.