AccuQuilt GO! Qube 10" dies

The 10" Mix & Match set and its two Companion Sets, die by die, and the free QuiltLab patterns the Mix & Match set cuts from start to finish. Sizes checked against AccuQuilt’s product pages on November 9, 2026.

QuiltLab is independent and not endorsed by AccuQuilt. Some of these links are affiliate links: QuiltLab may earn a commission if you buy through them, at no extra cost to you.

GO! Qube Mix & Match 10" Block

#55797 on AccuQuilt (opens in a new tab)

The eight core shapes. AccuQuilt lists it for the GO!, GO! Bolt, GO! Big.

ShapeDieItemSize
1GO! Square-5 1/2" (5" Finished)#558035 1/2" cut, 5" finished
2GO! Square-3" (2 1/2" Finished)#558043" cut, 2 1/2" finished
3GO! Half Square Triangle-5" Finished Square#558055" finished square
4GO! Quarter Square Triangle-5" Finished Square#558065" finished square
5GO! Half Square Triangle-2 1/2" Finished Square#558072 1/2" finished square
6GO! Square on Point-4 1/16" (3 9/16" Finished)#55808See the die name
7GO! Parallelogram 45°-3 3/16" x 4 1/4" Sides (2 1/2" x 3 9/16" Finished)#55809See the die name
8GO! Rectangle-3" x 5 1/2" (2 1/2" x 5" Finished)#558103" x 5 1/2" cut, 2 1/2" x 5" finished

GO! Qube 10" Companion Set-Corners

#55798 on AccuQuilt (opens in a new tab)

Shapes 9 to 12.1. Needs the same-size Mix & Match set. AccuQuilt lists it for the GO!, GO! Bolt, GO! Big.

ShapeDieItemSize
9GO! Chisels-2 1/2" x 5" Finished Square#55811See the die name
10GO! Signature Block-5" Finished Square#55812See the die name
11.1GO! Bowtie-5" Finished Square#55813See the die name
12.1GO! Half Square Triangle-1 1/4" Finished Square#558141 1/4" finished square

GO! Qube 10" Companion Set-Angles

#55799 on AccuQuilt (opens in a new tab)

Shapes 13 to 16. Needs the same-size Mix & Match set. AccuQuilt lists it for the GO!, GO! Bolt, GO! Big.

ShapeDieItemSize
13GO! Triangles in Square-Center-5" Finished Square#55820See the die name
14GO! Triangles in Square-Sides-5" Finished Square#55821See the die name
15GO! Kite-Center-5" Finished Square#55822See the die name
16GO! Trapezoid 45°-2 1/4"H x 7 1/4"W Cut (5" Finished Square)#55823See the die name

Free block patterns you can cut with the 10" Mix & Match set

Every piece in these blocks matches a die in the set to the sixteenth of an inch. Borders, sashing and binding are cut as each pattern shows.

None of the library’s blocks is cut entirely by this set yet. Many use some of its shapes: each block pattern’s page lists the dies that fit.

All GO! Qube sizes and strip cutters