Is AccuQuilt or Cricut better for quilting?
AccuQuilt, for piecing: it cuts up to six layers at once with seam allowances built in. A Cricut is better for applique and custom shapes, but it cuts one layer at a time.
For cutting quilt pieces, an AccuQuilt GO! is the better tool: its dies cut up to six layers at once, with the quarter-inch seam allowance and trimmed corners built in. For applique, lettering and any shape you draw yourself, a digital cutter such as the Cricut Maker or Brother ScanNCut is better, one layer at a time. Below, five ways to cut quilt pieces compared.
| Name | How it cuts | Layers at once | Best for |
|---|---|---|---|
| AccuQuilt GO! fabric cutters | Roll a die through by hand or motor | Up to 6 | Piecing: squares, triangles, strips |
| Cricut Maker 5 | Rotary blade on a mat, from a design file | 1 | Applique, lettering, custom shapes |
| Brother ScanNCut | Blade on a mat; scans drawings | 1 | Tracing a drawn or printed applique shape |
| Sizzix Big Shot Plus | Roll a die through by hand | Several | Small shapes, applique, mixed crafts |
| Rotary cutter, ruler and mat | Blade and ruler by hand | Up to about 6 with a sharp 45mm | Everything, any size |
Specs and prices from accuquilt.com and cricut.com, read 2026-11-10.
Piecing or applique. Die cutters (AccuQuilt, Sizzix) are fastest for many identical pieces. Digital cutters (Cricut, ScanNCut) are for one-off shapes: applique, lettering, anything curved you drew yourself.
Seam allowances. AccuQuilt geometric dies include the 1/4 inch seam allowance. On a digital cutter, add it in the software, and check that your shapes are big enough for the blade.
Hands and wrists. If rotary cutting hurts, a die cutter moves the work to a crank or a motor. The GO! Big is electric, so there is no crank at all.
Total cost. With die cutters the dies cost more than the machine over time. List the shapes and sizes you make most, and price those dies before you choose.
Some of these links are affiliate links: QuiltLab may earn a commission if you buy through them, at no extra cost to you.
In short: The fastest way to cut pieced quilts: roll a die through and get stacks of exact shapes with seam allowances included.
You lay fabric on a foam-backed die, cover it with a cutting mat and roll it through the cutter. AccuQuilt says the GO! cuts up to six layers at a time, and its geometric dies include the 1/4 inch seam allowance and pre-trimmed (dog-eared) corners, so pieces line up without trimming. The range runs from the small GO! Me to the standard GO!, the electric GO! Big and the Studio 2. The Ready. Set. GO! bundle includes the GO! cutter, a GO! Qube Mix & Match block set, a 2 1/2 inch strip die, two mats and Eleanor Burns' GO! Qube book.
In short: Cuts any shape you can draw, including applique and lettering, one layer at a time.
The Cricut Maker 5 listed at $349 on cricut.com when checked. With its rotary blade it cuts fabric up to 12 inches wide on a fabric mat, following a shape from Cricut Design Space, which can add a seam allowance. Cricut recommends shapes of 3/4 inch or larger with the rotary blade. It cuts one layer at a time, so it is slow for a quilt made of many identical pieces, but no die cutter can match it for custom applique shapes.
In short: A digital cutter with a built-in scanner: draw or print a shape, scan it, cut it in fabric.
Brother's ScanNCut works like a digital cutter but has a scanner built in, so you can place a drawing, a pattern template or a printed motif on the mat, scan it, and cut around it. That makes it popular for applique and fussy-cut motifs. Like the Cricut, it cuts one layer at a time, and thin cotton usually needs a stabilizer or support sheet underneath.
In short: A craft die cutter that also cuts fabric; a good fit if you already own Sizzix dies.
The Big Shot Plus is a hand-cranked die cutter from the paper-craft world. With Sizzix fabric dies it cuts several layers of fabric at once, much like an AccuQuilt, and the same machine cuts paper and felt. The fabric die range is smaller than AccuQuilt's and less built around quilt block sizes, so check that the dies you need exist before you buy.
In short: Still the most flexible way to cut: any size, any shape, no dies to buy.
A 45mm rotary cutter, a 6 by 24 inch ruler and a self-healing mat cut every straight-sided shape in any size. You measure each cut yourself, so accuracy depends on you, and repeated cutting is hard on wrists and shoulders. Most quilters who buy a cutting machine keep a rotary cutter for odd sizes and trimming.
AccuQuilt, for piecing: it cuts up to six layers at once with seam allowances built in. A Cricut is better for applique and custom shapes, but it cuts one layer at a time.
Yes. The Cricut Maker cuts fabric with its rotary blade on a fabric mat, up to 12 inches wide. Cricut recommends shapes of at least 3/4 inch with the rotary blade.
If you make many quilts from standard shapes, yes: it saves cutting time and strain. If you mostly make one-off designs in odd sizes, a good rotary cutter and ruler may serve you better.
Start with the GO! Qube set for the block size you make most and a 2 1/2 inch strip die. QuiltLab's die guide shows which Qube set cuts the most free patterns.
Printable PDF patterns with cutting charts and diagrams, free to download.
Lay out blocks and try colors in QuiltLab's grid editor before you cut.
Free forever, no card needed.
QuiltLab updates, tips and quilting inspiration. Unsubscribe anytime.